Leaderboard

[Traduction Française ci-dessous] Hello the Pinsound-players, After more than one year of work, I am announcing the release of the Mix for Simpson Stern for the end of 2020. It is almost finished and under test. Programming for the Shaker is also complete. The mix will be in voice of American origin AND in French !!!!!? See you soon? Baptiste Bonjour les Pinsoundiens flippés, Suite à plus d'un an de travail, j'annonce pour cette fin d'année 2020 la sortie du Mix pour Simpson Stern. Il est quasi terminé et en cours de test. La programmation du Shaker est également terminée. Le mix sera en voix d'origine Américaine ET en Français !!!!!? A bientôt? Baptiste

New modern soundpack for this great pin. Updated song list and new sound effects. Tracklist: It's So Easy Welcome To The Jungle Locomotive Estranged Nightrain Sweet Child O' Mine Paradise City You Could Be Mine Perfect Crime Back Off Bitch Civil War Right Next Door To Hell Mr Brownstone Don't Damn Me Rocket Queen - Mission music replaced. - Multiball music replaced. - Updated sound FX. - Ball launch music loops. - Ball drain music clips. + Lots of other stuff. Added to download section (pending approval) Temporary download link (until approved here): Download Current Version 1.6

Here are my 2 offerings for DESW. I'm open to suggestions if there is a problem or ideas for improvement. Enjoy and let me know what you think! http://pinsound-community.org/forum/index.php?/files/category/65-star-wars/

Is there a way to copy all the user shaker settings from one pinsound.config-file to another?

I'm posting as m00dawg2 since I can't seem to dig up my old credentials (whoops). I'm the creator of the STTNG Anthology soundpack and have been working on adding some extras to it this weekend as I finally brought my TNG back to working order. Additions are at the bottom of this post for the curious. In any case, since I last used Pinsound there's now a Studio Pro (Windows only alas) to replace the old studio? Having some issues since Studio Pro doesn't seem to recognize the old sound packs. Anyone know if there is a converter available? I made the mistake of upgrading my firmware which seems to have also reset some of my gain settings and it seems Pro will allow me to configure those again. I downloaded the upgraded base pack from the main Pinsound website so I could go in and manually put my files back. That's a lot of work I'd like to avoid if I could though? #### Additions: I haven't managed to run into "Shut Up Wesley!" on my playthroughs but some of the others are working. "Shut Up Wesley!" was what originally inspired me to work on this again hehe. I wish I could coordinate that a bit better so it only happens when Wesley starts talking (rather than Data) but I don't think there is a way to do that. Also per the above I need to re-adjust the gain though and make some additional tweaks. Once I'm done I'll upload this as an available soundpack for folks that want these. 1.01: voice/000015 Added Wesley “Sir this might finish me...” voice/000355 Added “Shut up Wesley” voice/000170 Added Q’s “Well just have to see how ready you are” voice/000235 Added Q’s “The Trial Never Ends” from Picard Season 2 voice/000236 Added Q’s “The Trial Never Ends” voice/000450 Added Borg Queen “We will add your distictiveness to our own” voice/000451 Added Borg Queen “Welcome home Locutus” voice/000624 Added Geordi “We have a problem here” voice/000625 Added Data “Oh shit” Added Geordi Warp Core Breach music/000001 Added Data’s Lifeforms music/000007 Added “Watch your future’s end” music/000022 Added Picard Season 1 Theme

I've also found 1 sound clip in the package available for download that was not dumped when putting the ROMs through M1/BridgeM1, and it's a sound clip that I know to be in the game comparing against my stock board. So that also raises the question of how users are dumping the sound from the ROMs. It would be great to have a complete guide on how to recreate stock sound packages.

That would be awesome, because it would allow easy switchign between orchestrations while maintaining the shaker settings.

Hello, I'm new to the PinWorld but do what I can as an IT professional. I recently got a Pinsound system, and put it on my IJ Pinball Adventure machine. In doing so I liked the "Re-Mastered Endproduk the best but found many issues with the sound files. The music was too low, the callouts where strange and not staying true to the original and the levels of callouts where either too loud or too low. Well I went I spent over 10 hours tweaking all the music files, editing with Audacity and the amplify and Envelope functions. I even added some much needed silence when needed. For example, when you complete the ramp loops and have to hit the center to make the plane crash animation.. The callout says "Great Shot" when you make it, but since this is also the ball lock hole, it would say both of these callouts at the same time on top of each other. I fixed it so that the Locked ball now has a silence buffer and they are now one after another. My point is that I just completed this Re-Master of Endproduckt's Sound package and while I'd gladly give him all the credit; I just wondered if anyone would like to try the version I created? Is there a way to add to the list of existing sound packages for IJ pinball adventure. Thanks. I call it "Jedi-Re-Remaster of Endproduk" Thanks.

Since May 2021, the PLUS & NEO sound boards natively support OGG sound files. WAV files are obviously still supported. Thank you!

it seems there was a problem with the database, after cleaning the very old topics, the forum should be OK again.

Also make sure you have the data east power booster!

Thanks for doing such a great job and for the continual updates!

Hello to the whole Pinsound community! I was behind on my promise to release the mix for the end of 2020, due to personal events. the mix will be released very soon, before the end of February. Thank you for your patience! See you soon!

Hi! I am currently working on a reorchestration/re-sound design on Bram Stokers Dracula. Since I am a big fan of the movie, I am for now using most of the moviesoundtrack istead of the original score by Paul Heitsch, witch is awesome, but unfortunately a bit dated soundwise . Maybe later I will take the time to reorchestrate it. But, the movie soundtrack also works really great. I am also creating multiple layers of new sounds and samples. Trying to make it more exiting with real sounds and effects instead of the mono synth-effects. All new samples and effects are really dynamic and in stereo! I`m able to extract the dialouge call outs from the movie`s DTS 5.1 center channel info, but some voice samples created especially for the game like "extra ball" and so on, is not easy to re-create. They will possibly be left out, unless some of you know a great impersonator, or have access to the master recordings :-) This takes a lot of time, but I would say I`m half way done. So in a few weeks I will upload to the community. Cheers!

Updated to 1.4. New sound effects and overall polish. Added crowd cheering sounds (Ball launch, Multiball, Jackpots) to create that concert feel. Still working to update rest of the sounds and voices.

Excellent soundpack, thanks for your work!

Je déterre ce topic car je viens de m'acheter une pinsound+ pour le TAF et j'ai bien aimé la version de Djedj. Le seul défaut que je lui trouvais était la mauvaise balance entre les voix (pas assez fortes) et la musique (OK). J'ai donc modifié sous pinsound studio pro le fichier en poussant le gain global des voix (trigger à 4 h) et le résultat me plaît plus... Voilà si cela peut aider quelqu'un, un petit tweak rapide. Bon flip à tous !

Try updating your firmware. I had an OST that would not play at all, even though it gave no error messages. I updated the firmware and voila - it started working like a champ!

I like the Disco Version ? Pinsound +

Seems like the files are downloading fine today. Thanks Vader! This is pretty bad ass!

Grabbed your Frankenstein mix - it's brilliant. I did a GnR mix and that was tough - so Thanks for all the hard work on Frankenstein.

Good news! After uploading the recent Pinsound+ firmware version v183 (released in May 2018), the custom mixes now work on my Dr. Who. A big thanks to Nicolas and all mix masters!

I havn't started yet, so nothing to hear, but I will do a complete Whiter Water reorchestration. The voice of Wet Willy will be Warren Davis who did the original voice back in the 90's. Stay tuned, I will post speechsamples as soon as I get them. Olli

Not only yours, but all download files above 500 MB on this site. Edit: Found a solution, now using firefox with the downthemall extension. It all works fine now!

Uploaded!

Thank you! Still working on it, and it keeps getting better. Almost done ? A lot of details/sounds missing in this video, will upload a new demo video as soon as Easter with the wife and kids is over ?

Wow, really impressed by this awesome pinsound mix. You have reached your goal to give it a movie like feel, excellent!

Ooohhh my god the man has done it again :-) My Dream is that you can make for the TFTC and pinsound :-) I love my BSD that you made perfect!

Nah, had watched the youtube video and knew I had to have it. Speakers will be in stereo for sure. Thanks again

I put this new mix into my BSD and wired it for stereo sound. Its pretty amazing and really shows off how sound can make a game more enjoyable. I did find a few of the voice calls to be a bit low but other than that it is one of the best examples for pinsound out there today. Thanks Hazzard!

Hi All just an update. Still having issues as above with sound files not loading and boot repeating itself. If I quickly adjust volume one or two bars before it comes up with the tech difficulty fault it is good to go. Have contacted support again hoping for a fix. Have all 96 callouts redone in crisp stereo by a vocal actor old friend but cost me a bundle to get them doen. Hoping to have issue resolved soon.

Let os now hope one is creating the same for Tales From The Crypt :-) I LOVE PINSOUND!

To understand this man Hazzard , well i can ONLY say THANK YOU you are the best This game is now as it should have been, these sounds are so great that Williams would have sold 3000 more off the games When i renovated Data East Laser War and got the gratitude from Stern this guy Hazzard should get 1000 more Gratitudes from the all ONCE again the ever best , i will now NEVER sell my games!!!!!!!! Best regards and thanks again Hazzard!

love this audio missus wont play it by herself gives her the chills ha ha

Fantastic Job. And I just picked up a BSD last week - ! Thanks for your efforts

Hello to the enthusiasts of Batman and Pinsound! For all those who use the OST versions of the Batman, I has just posted a version 2 (thanks to the administrator ;-) This version is identical to the original. It corrects a bug which can occur in a very particular circumstance (thus rare) of loss of ball: the music of bonus can start then break off brutally immediately. This version replaces the previous OST. The firmware 0090 is always compulsory!!! Even if I do not have indicated it in the name of the file. The version 1991_Original is not concerned by this bug. Good game to all! Long live the pinball machine!! Batman and Pinsound!! Bonjour aux passionnés de Batman et de Pinsound ! Pour tous ceux qui utilisent les versions OST du Batman, je viens de poster une version 2 (merci à l'administrateur ;-) Cette version est identique à l'original. Elle corrige un bug pouvant se produire dans une circonstance très particulière (donc rare) de perte de bille : la musique des bonus peut démarrer puis s'interrompre brutalement aussitôt. Cette version remplace les OST précédentes. Le firmware 0090 est toujours obligatoire !!! Même si je ne l'ai pas ré-indiqué dans le nom du fichier. La version 1991_Original n'est pas concerné par ce bug. Bon jeu à tous ! Vive le flip !! Batman et Pinsound !! Baptiste

If the sound package is really big, you will have to wait up to 2 or 3 hours. You should hear the progress "10 percent...", "20 percent...", ...